15 Trends To Watch In The New Year Upvc Window Handle Replacement
UPVC Window Handle Replacement
Replacing a damaged or broken window handle is a relatively simple process and, Window Handle Replacement with the right tools, it can be done quite quickly. However, it is essential to know your type of handle and its spindle length before buying an alternative.
Older uPVC windows have handles with cockspurs, which have a spur that protrudes to lock over a cockspur wedge striker plate. They can be right or left-handed and have to be matched when replacing.
What type of lock and handle do I have?
There are many kinds of window handles made from upvc and locks, each with its own benefits and purposes. The type of handle you have will determine how easy it is to open your windows and if the locking mechanism works as intended. Over time, and with regular use the handles made of upvc on your windows could become damaged and worn out. This makes them less secure and effective. In some cases they may even fall off completely. If you notice that your upvc window handles have fallen off, it's essential to fix them as soon as possible. This will prevent potential break-ins and protect your home from burglary.
It is a good thing that replacing your window handles made of upvc is a simple task that can be done by nearly anyone. With just a few tools and the proper knowledge it's a simple procedure that shouldn't take more than a couple minutes. To begin, you will need to identify the type of lock and handle you have on your window and then identify the best replacement upvc window handles.
Inline Espagnolette Handles
These are the most commonly used type of upvc handle and are typically located on the side of your window. They are flat and come with a latch which engages the locking mechanism of the window frame. Inline upvc handles also come with a spindle that runs through the middle of the handle and then into the frame of the window to activate the latch.
Cockspur Handles
These handles are usually found on older uPVC window frames and have distinct hook-shaped designs. Cockspur handles have a single screw that is used to secure the handle to the frame of the window and aren't as secure as other kinds of window handles.
Handles that can tilt and turn
The tilt and turn handles are different from other upvc handles because they can be turned to open the window and then lowered into the window to ventilate. They typically have a 7mm spindle on the back of the handle. They are available in left and right handed versions.
It is crucial to determine the spindle size when buying new upvc handles. There are a few that are the exact same size. Drop something in the middle of the hole to check the length. This is the maximum spindle length that will be suitable for your window.
What is a spindle?
uPVC window handles work in a similar way like doors. By turning the handle, you can open a latch in the frame. The window then opens and closed. The handles could be damaged, particularly if they're used frequently or exposed to harsh conditions. It is possible to replace the handles on your uPVC window if they are not functioning correctly.
There are a variety of uPVC handles, including Espag, Cockspur, and Spaded handles. They are designed to fit into the uPVC frames in a variety of ways. Each handle utilizes a specific spindle to lock the mechanism into the window. It is crucial to know the kind of handle that is installed on your uPVC windows to ensure that you replace it with the correct one.
You can find out what kind of uPVC handle you have by inspecting the base of the handle. A snap-in covers should be over the screw that holds the base of the handle in place. Take it off and you should be able see the second screw at the opposite end of the base of the handle. After both screws are removed you should be able to pull the handle away from the uPVC window.
After taking off the uPVC handle, carefully unscrew it from the locking mechanism. Take careful note of the length of the spindle since you'll need to make sure that you purchase one that is the same length as your original handle and locking mechanism.
The main issue with most uPVC window handle problems is that the spindle gets worn out and cannot longer work with the locking mechanism. This can be due to wear and tear from continuous use or a loosening of the locking mechanism, or Window Handle Replacement even rust over time. If this occurs, it is necessary to replace the window handle as well as the locking mechanism to restore the full functionality to your uPVC windows.
How do I get rid of the handle from the previous one?
Over time and through everyday usage, window handles could be damaged or destroyed, and if this happens it is important to repair them as soon as possible to ensure the safety of your home. It is easy to replace a worn or damaged handle. The task can be accomplished in under a minute without the need for any special tools.
To remove the handle, you first need to remove the screw at the base of the handle. Once the screw has been removed, the handle will be pulled away. There will be a second screw that is located at the bottom of the handle's base, and it is able to be removed as well. Once both of these screws are removed, the handle can be completely detached from the base of the window.
After removing the handle, align the fixing holes of the new handle to the holes that are already in the window frame. There may be a little cap or sticker on the new handle, so remove the caps if needed, and then screw the handle in its place. Once the handle is in place, it is important to test that it is working by turning the handle and ensuring that the lock mechanism is activated.
Espag handles come with a spindle that protrudes from the handle and slots into a multipoint locking mechanism inside the frame of the window. Cadenza windows feature a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and hook over the outer frame of the window or the transom crossmember of the bar.
Once you have the new handle in place, insert the spindle inside the window lock and then tighten it. Replace the snap-in cover and screw cap (if appropriate) once the handle is securely fixed. The handle is now ready for use to use, so try opening and closing the window a few times to ensure that it works correctly and securely.
How do I fit the new handle?
The process of changing your window handle made of uPVC isn't difficult and the process is simple. All you need is an screwdriver and a little bit of patience. First, ensure that the old handle is unlocked. Remove any visible screws. You can also replace them with screw caps. Once the handle is removed it is necessary to take an note of the length of the spindle that protrudes from the back of the handle. This is crucial since it will determine the kind of handle you'll require to purchase.
Espagnolette handles made of uPVC are the most well-known type of handle. The spindle runs through the handle to control the locking mechanism within the frame of the window. The handle opens the latch and allows the window to open. When used regularly and over time, handles made of espagnolette can be damaged.
Cadenza handles are a kind of uPVC handle that is commonly employed with tilt and turn windows. They feature a protruding knife that works with a multiple-point locking mechanism inside the window. They are more secure than espagnolette handles since they only open from the inside. You can replace them with the same method that you would for espagnolette handles however, make sure that the new handle is not angled and flat.
After you have chosen the right handle, simply align the new handle with existing screw holes prior to screwing it in place. Then, you should put the screws on and test the new handle. You can perform this by dragging the handle back and forth from the locked position to the unlocked several times. If you experience any issues, it might be worth contacting a specialist to see if they are able to assist in resolving the issue. They will often be able to guide you on the best way to solve the issue in a fast and effective manner.